Leonardo
Italian petascale supercomputer run by CINECA for European research
Leonardo is a petascale supercomputer housed in the CINECA datacentre in Bologna, Italy, and inaugurated in November 2022. Built by Atos as a BullSequana XH2000 system with close to 14,000 Nvidia Ampere GPUs, it reached 250 petaflops and placed fourth worldwide on its first TOP500 listing.
- Inaugurated November 2022 in Bologna with 250 petaflops peak performance
- 13,824 Nvidia Ampere GPUs across 3,456 booster nodes
- Fourth in the world on its first TOP500 listing, second in Europe
- €240 million cost, split evenly between the EU and Italy
- Housed in a 1952 Pier Luigi Nervi tobacco factory building
What it is
Leonardo is a petascale supercomputer sitting in the CINECA datacentre in Bologna, in northern Italy. Atos supplied the hardware as a BullSequana XH2000 machine, and CINECA operates it on behalf of the European High-Performance Computing Joint Undertaking. The installation packs close to 14,000 Nvidia Ampere graphics processors and reaches 250 petaflops at peak, which is 250 quadrillion operations every second. Memory totals 2.8 petabytes and storage 110 petabytes, spread over more than 900 square metres of floor space with a power draw of 6 MW. It runs Red Hat Enterprise Linux and was placed tenth on the TOP500 list in June 2025.
How it came about
Leonardo went live in November 2022 and was formally opened by Sergio Mattarella, the President of Italy. Its first appearance on the TOP500 ranking, in November 2022, put it fourth in the world and second in Europe. The machine forms part of the European High-Performance Computing Joint Undertaking programme. The building it occupies, the Bologna Technopole, was originally a tobacco factory constructed in 1952 by Pier Luigi Nervi, an architect known for creative use of reinforced concrete.
The compute
The installation is split into three modules. A booster module holds 3,456 BullSequana X2135 "Da Vinci" blades, each with an Intel Xeon 8358 processor, 512 GB of DDR4 memory and four custom Ampere GPUs with 64 GB of HBM2, delivering 89.4 TFLOPs peak per node. A data centric module adds 1,536 BullSequana X2610 blades built around Intel Sapphire Rapids chips. A front-end and service module handles logins, visualisation and management, with some nodes carrying Nvidia Quadro RTX8000 graphics. Networking uses 200 Gbit/s Nvidia Mellanox HDR InfiniBand, and DDN appliances provide fast NVMe and high-capacity disk tiers.
Where the GPUs are
Leonardo sits inside the CINECA datacentre in Bologna, within the Bologna Technopole building. The floor area exceeds 900 square metres and the system draws 6 MW. The same building also accommodates a new supercomputer for the European Centre for Medium-Range Weather Forecasts, made of four BullSequana XH2000 clusters, which took over from that organisation's earlier Reading site in England.
Customers and deals
The machine serves European researchers through the EuroHPC Joint Undertaking, which co-funds it alongside the Italian government. CINECA operates the system day to day.
Money and ownership
Leonardo cost €240 million in total. Half of that, €120 million, came from the European Union through the EuroHPC Joint Undertaking, and the Italian Ministry of Education, University and Research matched it with a further €120 million.
Its place in AI
At its debut on the TOP500 in November 2022 Leonardo ranked fourth globally and second in Europe, among the five fastest systems anywhere at the time. By the June 2025 list it stood tenth. It is one of the flagship EuroHPC machines, alongside LUMI in Kajaani, Finland.
Questions people ask about Leonardo
What is Leonardo?
It is a petascale supercomputer in the CINECA datacentre in Bologna, Italy. Atos built it as a BullSequana XH2000 system, and CINECA runs it for the European High-Performance Computing Joint Undertaking. It was inaugurated in November 2022.
How fast is it?
Peak performance is 250 petaflops, meaning 250 quadrillion operations per second. The booster module alone is rated at 240.50 LINPACK petaflops. On its first TOP500 entry in November 2022 it ranked fourth worldwide and second in Europe.
What hardware does it use?
The booster module carries 13,824 Nvidia Ampere A100 GPUs, four on each of 3,456 blade nodes, linked by 200 Gbit/s Nvidia Mellanox HDR InfiniBand. A separate module uses 1,536 Intel Sapphire Rapids CPUs. Storage comes from DDN appliances, and the operating system is Red Hat Enterprise Linux.
Who paid for it?
The total cost was €240 million. The European Union contributed €120 million through the EuroHPC Joint Undertaking, and the Italian Ministry of Education, University and Research provided a matching €120 million.
Where does it physically sit?
Inside the CINECA datacentre in Bologna, in a building called the Bologna Technopole. That structure dates from 1952, was designed by Pier Luigi Nervi as a tobacco factory, and also holds a new supercomputer for the European Centre for Medium-Range Weather Forecasts.
Good reading and sources
- Official websiteOfficial site
- Nvidia and Cineca Team Up to Create WorldTom's Hardware, Article
- Italy chosen to host meteorological supercomputerDCD, Article
- November 2022TOP500, Article
- Leonardo (supercomputer) on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Leonardo (supercomputer)", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryNeocloud rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.